Tersus Natural WW Degreaser has been shown to be effective with differing concentrations depending on the application. We usually advise our customers to use a conservative mixture of six parts water for each part of degreaser, but tests have shown that effectiveness does not reduce significantly even at twenty parts of water to one part of degreaser. These tests were conducted on a three inch layer of solidified oil and grease that had not been cleaned in several years. The solution easily cut through the grease leaving only clean metal behind.

We would suggest using pressure washers with a dilution of the Tersus Natural WW Degreaser it will immediately cut through all grease, fat and oil within a lift station and leaves the treated area completely clean. The Tersus Natural WW Degreaser will continue to work within the waste water stream dissolving grease, fat and oil residue within the waste water pipes and further down the line until it completely biodegrades or evaporates. The degreaser will decompose into CO₂ and water at the end of its life cycle.